Can I Use Motor Oil For My Electric Chainsaw?

Can I Use Motor Oil For My Electric Chainsaw

The machinery of an electric chainsaw doesn’t need to be fuelled with oil. However, for seamless functioning of the machine, you need to lubricate the bar and the chain areas.

The dilemma begins when you have to find a suitable oil. Let me tell you that it is not uncommon for people to feel that motor oil can be used for lubricating the chainsaw.

Well, if you need a precise and no-nonsense answer then it will be a straight and utter “NO”. It’s not like you cannot use the motor oil but you shouldn’t use it. For starters, it can hamper the performance of the chainsaw, leading to high damage to the oil system.

Can I Use Motor Oil For My Electric Chainsaw

What is the Need of Oiling a Chainsaw?

Irrespective of the means of working of a chainsaw i.e. gasoline or electric, the bar and, the chain will require oiling. For both the types of chainsaws, you can use the same kind of oil.

The prime task of these machines is to cut properly with minimal risk of failure. If the performance is going down and getting poor, you can fix it by lubricating the machine. Overall, for the smooth and comfortable performance of a chainsaw, you need to oil it.

What are the Pitfalls of Using Wrong Oil on a Chainsaw?

The chain and the bar, both need oiling for smooth functioning. A wrong oil that is not meant to be used on the chainsaw can ruin both the components.

It can also damage the clutch assembly and drive sprocket. Furthermore, if the tip is extremely hot or smoking then you must know that the lubrication is low and the engine should be turned off instantly. Also, you are advised to check the oiling system.  

What are the Drawbacks of Using Motor Oil on Chainsaw?

For some people, usage of motor oil on a chainsaw is a constantly debatable issue. Some people will claim that their father or grandfather trusted motor oil with the chainsaw and never experienced any bar wear.

People have all kind of opinions but to the larger audience and according to the professionals, using motor oil on a chainsaw is not a wise choice to make. There are various kinds of oils available on the market that are dedicated to this task. It is best to prefer oils from good brands.

First of all, using recycled motor oil is prohibited. Please note that the used motor oil that is drained from the automobiles will always have microscopic metal bits. These bits are harmful to the chainsaw as they act as an abrasive.

It is also believed that the used motor oil is so bad for the chainsaw that it can burn the chain and bar while operating. In the urge of saving a few dollars on a high-quality chainsaw oil, you might have to purchase the entire setup again.

Also, the used oil might tear down the chainsaw completely as it must be already broken down. The motor oil does not possess the qualities and properties of a bar oil that could keep the oil in the grooves and chain area.

Moreover, if you replace the oil too frequently then it will definitely weaken the performance of the chainsaw and also eat up all the savings.

You might also experience oil spatters while using the chainsaw. While using the machine, the oil will spread on your boots, clothes, and all over the floor. This will increase your work even more.

What are the Properties of a Good Chainsaw Oil?

There is no denying the fact that there is a massive choice available in the chainsaw oil. You can find various brands manufacturing high-quality oil that don’t just increase the performance of chainsaw but also increases its life. Here are some of the common benefits of a good chainsaw oil:

  • Capable of providing maximum engine power
  • Makes sure that there is less friction
  • The cutting time is swift
  • The chain links and bar’s film strength are enhanced and the oil is able to prevent wear and tear
  • Protect metal parts from corrosion and rust
  • Fights build-up of deposits like gum, sap and, pitch

These are some of the common benefits of using high-quality chainsaw oil.

What is the Best Oil for Chainsaw?

As mentioned earlier, the oil used to lubricate the bar and chain of a gasoline chainsaw is similar to that of an electric chainsaw. It is important to pick the right oil to ensure good working and durability of the product.

It might come as a surprise but vegetable oil is a great pick for the chainsaws when used to cut the tress as it will do less damage while pruning.

There are oils that have the ability to change their viscosity largely because of the temperature changes. Make sure to avoid such oils if in the region where you are using the chainsaw has a diverse kind of temperature.

Also, there are oils that help in reducing the “throw-off” problem as these help in keeping the components bound together for great usage and more reliability.

Using the Oil Recommended by the Manufacturer

The manufacturers of the chainsaw usually make recommendations of the kind of oils that will be suitable for their product.

DirectoryelEctronic.com highly encourage the usage of recommended oil from the manufacturer because firstly, these oils are tested on the chainsaws and the performance is examined.

Secondly, if you make your own selection and bring a wrong oil then it might ruin your experience as well as the entire product.

Conclusion

As far as motor oil is concerned, it is simply not suggested for electric chainsaws. It will not be able to give you good performance or prevent the damage. Rather, the motor oil will contribute to the damage.

Make sure to be very selective about these products because it is because of the right oil, you will be able to use the chainsaw for the longest time and with great satisfaction.

Which Direction Does A Chain Go On A Chain Saw And Why?

Direction-Does-A-Chain-Go-On-A-Chain-Saw

You probably already know before now how handy power tools can be for different purposes.  The problem, however, is that there is always a need for high-level maintenance. You don’t want to be making some silly mistakes with your power tool, because you know for sure that such mistakes can lead to a serious occurrence at any time. Notable among such tools that require high level of care to function properly is the chain saw; most significantly its blade.

The direction of the chain saw is very important in determining its efficiency. If for instance, the blade moves in the wrong direction, it would not be effective for cutting down the required material. Instead, it goes on to cut entirely different materials. In worse case scenarios, it can even lead to injury.

Typically, you can avert any of these by being cautious of the direction, while replacing the blade, chain, or bar of your chainsaw. This can seem a little difficult, but with the right attention paid to details, this mistake can be averted.

Direction Does A Chain Go On A Chain Saw

Why Should It Go In The Right Direction?

It is already enough headache having to stop between your work to take the blade of your chainsaw apart and replace it. But an even bigger stress is needing to again take the device apart after putting it together because it wasn’t done correctly. Apart from that, this seemingly small mistake can lead to very significant damages.

So think of it. Why take such risks, when you can easily learn how to set the chain saw in the right direction and avoid mistakes. Let’s take you through how you can know the direction of your chain saw blades.

How to Know The Chainsaw Blades Direction?

You already know the importance of having your chainsaw running in the right direction by now. Like DirectoryElectronic.com already pointed out, your whole chainsaw will be pretty ineffective and risky when it is not working in the right direction.

What’s the point of going on with such a device that runs in the wrong direction when you can check the required chainsaw blade before using it. Here, take a look at a few tips that you could adopt to find out if the blade is running in the right direction.

Check It Out From The Top

If you are looking from the top, you would inadvertently notice that the blade is contained at the top of the chain. By default, the blades come with two edges. While one of the edges is usually sharp, the other is dull. The chain of the chainsaw is designed to rotate in a clockwise direction.

Irrespective of model, the chainsaw is always designed to work the same. This is the reason why you should always ensure that the sharp edges of the blade faces the clockwise direction during any fix. From the top view, you should normally notice that the sharp edges would be in the opposite direction from the body of the chainsaw, or its motor as you would like to call it.

If your blade is faced in that direction, them its in the right direction.

Checking From the Front and Top View

Just like checking from the top, checking from the side is not complicated. When at this, suppose the chain part is positioned in your right hand side, and the engine part on your left-hand side. Then you should position the blade to be from the left to right direction, as in clockwise.

Note that if it is not done this way, then it would definitely be running in the wrong direction.

Checking From the Bottom Angle

Well, you’ve probably guessed by now that the view from this direction would be exactly opposite from what it is when looked at from the top. Let’s still spell it out though. If the blade is positioned rightly, then you would notice that it is facing towards the body or the engine part of the chainsaw when looking from the bottom.

Checking From The Chain Side View

Now, if you are going to look from this position, then you should expect to see it coming downside from the upside position. If you notice it moving backward, then you want to check for abnormalities.

Having known the right positions of blade and why it should be so, let’s now talk about how to make the chainsaw blade get back to running correctly in case of any abnormalities.

How To Get The Chainsaw Blade To Run In The Correct Direction?

Chainsaw Chain Direction

Now that you’ve probably checked your chainsaw, we can only hope that its blade is working as correctly as it should. If it is not working in the correct direction, however, there’s no need for unnecessary alarm. Just get it reset and its good to go again.

Here, take a look at the simple steps to adopt in doing this.

Fix the Bar

Start by checking to be sure that the chain bar is reattached to the body of the chainsaw. If it is not, then you want to carefully place if back in its rightful place. Ensure that the bar gets to its required length according to fitting specifications.

Get the bar adjusted enough to fit the chain perfectly. Also ensure that the fitting of the chain is not too tight when put on the bar.

Check The Direction of The Chainsaw Blade

Bear it in mind at this point that the reason for resetting your chainsaw is because its blade direction is probably faulty. With that in mind, you now know that you should pay extra attention to making sure that the chain us mounted correctly.

It’s easy. Just follow the procedures for checking the right direction to know if you are doing it correctly.

Tighten Up the Blade

Once you are done with all other steps, then it’s time for this last procedure. Tightening up the chain to avoid any disturbances while it is running. The goal here is not to make it too tight or too loose since either of them can make the chainsaw not to function as properly as it should.

Now that you understand everything about the chainsaw blade and how it should be positioned, DirectoryElectronic.com hope that you enjoy its usage for a long time. Remember, however, that there are a few other reasons apart from poor blade positioning that can make the chainsaw malfunction.

More:

What Kind of Oil does an Electric Chainsaw Use?

How Does a Chainsaw Oiler Work?

How Does a Chainsaw Oiler Work

Do you remember friction? That guy that helps you walk and also applies brakes to your car?

Well, if you have used a chainsaw long enough, you might be aware of the consequences of not managing friction in some parts.  During use, the chain requires constant lubrication as it moves across the guide.

How Does a Chainsaw Oiler Work

If you don’t apply any lube, the chain, guide, bar, and even the engine will all be damaged. One of the immediate effects you will see is a kickback. In case you don’t know, this is when the chain violently reverses its movement. Depending on the extent of the damages, you might be forced to buy another chainsaw.

So, how do you keep your chain lubricated? That is where the chainsaw oiler comes in; let DirectoryElectronic.com see how it works.

The General Operation of a Chainsaw Oiler

The General Operation of a Chainsaw Oiler

The operation of a chainsaw oiler depends on the intention of the manufacturer. As such, there are three main types of oilers, and they all work differently. It is essential to have this information with you since it will determine how you control your machine’s lubrication system during operations.

First, you will have to fill the oil reservoir with chainsaw bar oil and keep up with its level during operation. Failure to do so may cause your saw to burn out due to lack of lube. Nonetheless, today, you will find most chainsaws with transparent windows that allow you to check the oil levels quickly. I would, however, recommend that you always top up your oil when refuelling or replacing batteries. 

Generally, the way an oiler works is that the throttle engages both the motor and oil pump simultaneously. A warm drive that is built when you throttle up triggers the pump to release oil to the bar. This oil is then distributed across the surface as it moves. Consequently, the friction between the bar and chainsaw and the heat released when cutting are both reduced.

 The types of oilers that we will cover in this article are the manual oilers, automatic oilers with constant flow, and automatic oilers with adjustable flow.

Manual Oilers

This type of oilers is gradually being phased out with the advancement of technology. You need to press a pump button to release oil s you work. The advantage is that you can control the amount of oil released depending on the type of wood being cut. However, if you forget to press the button, you might end up damaging the bar and chain due to excessive friction.

Automatic Oilers

Automatic Oilers Chainsaw

If you are forgetful, then you might need a chainsaw with an automatic oiler. Most modern chainsaws have this oiler installed to enhance your experience while ensuring that the chain and the bar are always lubricated. There are two types in this category; with a fixed and those with an adjustable flow of oil.

With a Fixed Flow

As the name suggests, oil is released to the chain and bar at a constant rate throughout the operation. The good thing with this is that you don’t have to control the release of the lubricant. All you need to do is ensure that there is always oil in the reservoir.

However, since it is a fixed flow, you will not be able to adjust the amount of lubricant flowing at any given time. Well, this is a disadvantage since the heat produced by your chain may vary with the size of the work done.

With Adjustable Flow

The second type of automatic oilers come with an adjustable screw that allows you to regulate the lubricant’s flow rate. These oilers address the main disadvantages pointed out in the two categories mentioned above.

Tips to Consider when Buying a New Chainsaw

Now that you already know how your chainsaw oiler works let us take a look at some other factors you ought to know.

As stated earlier, you should always ensure that the oil in the oil reservoir is kept at a favourable level to reduce the risk of it running out while cutting. Well, how frequently you refill your chainsaw’s reservoir is a subjective matter as it depends on its size.

If you are one of those who find it irritating to refill the oil reservoir constantly, then this might interest you. Some manufacturers have designed their gas saws in such a way that the power runs out before the oil is exhausted. This way, you will not be found off-guard, and you can refill it before resuming work.

The Type of Oil to Use

Since we are talking about lubrication, it would be important to touch on the oil itself. I have seen some people recycle used oil and expect it to work fine. Unfortunately, that is not possible! Manufacturers consider many factors while coming up with the perfect oil for your chainsaw.

Some of the things they keep in mind include viscosity which will determine whether the oil can be used under high or low-temperature conditions. The type of oil you decide to use will also depend on the weather conditions. As such, in your chainsaw’s manual, there is a specific lubricant recommended by the manufacturer.

Just to Wrap it Up…

Is your chainsaw installed with an automatic or manual oiler? Either way, make sure you keep in mind all the important information shared in this article. The lifespan of your chainsaw will depend on how you maintain it.

One last thing… sometimes you might realize that your chainsaw oiler is releasing excess or insufficient oil. Don’t panic; this is normal. In case of insufficient supply, adjust the screw to the right until you get the desired amount.

On the other hand, if the oil is excess, you will need to remove the spark plug to access the regulating bolt. Turn this bolt towards the left to regulate the amount released. Wipe off any oil that might have dripped on the guide bar with a dry rag. Remember to turn off the engine before embarking on any of these operations for your own safety.

Related:

What Weight is Bar and Chain Oil?

What Kind of Oil does an Electric Chainsaw Use?

What Weight is Bar and Chain Oil?

What Weight is Bar and Chain Oil

If you have ever operated a chainsaw before, then you more than likely know that bar oil was specifically designed to stick to the bar and chain of the saw.  In fact, it does not have any type of SAE (Society of Automotive Engineers) grade, which is very similar to that of the motor oil, which you use in your car.  However in the case of chainsaws, the SAE grade is rated to be used in both the winter and summer seasons.  While each manufacturer is going to have their own recommendation for the type of oil that they recommend you use and what grade it should be, it is best if you check your chainsaw’s owner manual when you are shopping for the bar oil that you are going to be using with your chainsaw.

What Weight is Bar and Chain Oil

Summer And Winter

If you have any type of experience with oil, then you will know that oil is going to thin out when the temperature is hotter.  On the contrary, oil is going to thicken up when it is colder during the colder time of year.  No matter what the weather conditions may be, either can cause you to have a dry chain, which means that you can more than likely expect your chainsaw to become damaged.

In order to prevent this from happening, most chainsaw manufacturers will find or make a bar oil that is going to match whatever the air temperature, as well as the saw in which it’s operated.  While the manufacturer’s are not going to disclose what weight their recommended oil really is, it is recommended that you instead use a oil that is SAE 30 weight during the hotter summer months, and a SAE 10 oil during the colder winter months.

Vegetable Oil As An Alternative

When your chainsaw is operating at its optimal performance, it will shoot out a stream of extra oil that is coming off of the bar and onto anything that gets in its way.  If the bar and chain oil you are using just happens to be petroleum-based, it can result in the harm of wildlife plants and creatures, as well as health problems in the chainsaw operator and others working in the same area.  This is one of the main downsides when it comes to using manufacturer recommended chainsaw bar and chain oil.

Vegetable Oil As An Alternative Chainsaw oil

However, if you were to use a vegetable-based bar and chain oil, it would be able to overcome all of the negative side affects of its petroleum based counterpart.  What makes using vegetable oil based bar and chain oil is that they are actually developed to work in both the warmer, as well as the colder temperatures.  On top of that, they also consume up to 50 percent less of the product when compared to petroleum bar and chain oils.  And to top it off, they are not going to pollute any streams or lakes when you are using them, as the vegetable oil lubricants are all biodegradable. 

The Standard in Chainsaw Bar And Chain Oil

When it comes to chainsaws, the more mainstream petroleum-based oils have been the standard for bar and chain oil.  This being said, lightweight oil is going to be used during the winter, while heavier oil is going to be used during the summer.  The manufacturers of most chainsaws will make their own bar and chain oils that have been specially blended for that particular chainsaw, which will also aid in extending their lifespan.  But for whatever reason, if those manufacturer recommended oils are not available, the chainsaw’s owner’s manual will more than likely recommend an alternative oil that can be used instead. 

Some manufacturers will recommend using one of the petroleum-based EP 90 transmission oils if you are unable to get the bar oil that is recommended.  However, while there is many who would suggest using motor oil as your bar and chain oil, it is not necessarily recommended as it lacks a bunch of the adequate viscosity that is required for lubing your chainsaws bar and chain.

Your Oil’s Stickiness

No matter which oil you decide to use in your chainsaw, just remember that it will need to have extremely good adhesion in order to stick to the chain when it goes all the way around the bar. On top of that, it is also going to need to help reduce the amount of friction that is built up, as well as prevent any type of damage from occurring to the actual chainsaw.

There are some bar and chain oils that will also prevent any sap and other debris from being able to stick to the chain or bar, which would eventually cause a clog within the chainsaw.  Because of this, you are going to want to make sure that the weight of the oil you are using is appropriate for the air temperature that you are working in.  To do this, all you need to do is simply hold your chainsaw roughly 8 inches away from a white rag or tree stump, and then rev the saw so that the engine is about 75 percent of full throttle for 60 seconds.  There should be a line that forms on either the rag or tree stump that the chainsaw is pointed at, and you should notice that oil is flowing freely from the chainsaw’s oiler.

Whether or not you are using a chainsaw oil or a chainsaw oil alternative, you are going to want to make sure that the weight of what you do use is comparable to SAE 30 during the warmer summer months, and a SAE 10 during the colder winter months.  When you do this, you will ensure that your chainsaw is going to be the most protected when it is used in the different elements.  Just remember that if you have any questions about which weight of oil you should be using for your chainsaw’s bar and chain, to simply inquire about it with a local professional.  They will be able to help answer any questions you may have and get you going in the right direction.

Read more:

What Kind of Oil does an Electric Chainsaw Use?

What Kind of Oil does an Electric Chainsaw Use?

What Kind of Oil does an Electric Chainsaw Use

As their name suggests, Electric Chainsaws derive their operational energy or power from electricity, meaning that they do not require any kind of fuel for their optimal performance. However, electric chainsaws require lubrication for effective service delivery, and the lubrication used does not vary so much from those used in gas-powered or bar chainsaws. In some instances where this type of chainsaw needs a mixture of gas and oil to run properly hence you are called upon to acquaint yourself with the right knowledge of the kind of oil as well as gases for the electric chainsaw.

Based on the above position, one would ask therefore; which is the best oil for use in an electric chainsaw? However complicated and confusion this is for many users, this article will discuss the types of recommended oils as well as their differences to avoid a situation where one mixes oils and even uses a combination of select gases and oil.

What Kind of Oil does an Electric Chainsaw Use

Highly Recommended Oil for the Electric Chainsaws

In the same way the chain and bar chainsaws use or require oil for optimal performance so do electric chainsaws need the application of its special type of oil? In many cases especially where there is inadequate supply of this oil, those used in bar and chainsaws can still be used for an electric chainsaw. However, take time to read over these three highly recommended types of oil to apply on your electric chainsaw:

  • Blended Chainsaw-Oils- these types of blended electric chainsaw oils work by reducing the susceptibility of the machine to ‘throw-off’ challenges. So how does it do this? It manages to accomplish this by keeping the chain and the bar together for durability and reliability.
  • Viscous Oils- there are highly viscous oils that change their viscosity to align with the immediate environmental conditions or changes. Avoid oils that change their viscosity especially where you are to work in an area that experiences great temperature changes in the form of weather changes.
  • Vegetable-Made or based oils- the vegetable based oils are the most recommended for electric chainsaws especially where you are keen to keep the carbon footprint intact. Moreover, this type of oil is used where you insist in mitigating or managing the damage on the trees that you are pruning.
  • Motor Oils- some chainsaw makers are known to recommend the use of motor oil when all the alternatives are not available since motor oils are not susceptible to weather changes, it is not highly viscous, and has been in use for many years in both bar and chainsaws.

Stick to the Manufacturer Recommendations

Some electric chainsaws come with specifically tailored-oil recommendations from the manufacturers. That is common on electric chainsaws that share characteristics with the bar chainsaws. In other situations, manufacturers have developed brands that have electric chainsaws working in exactly same version with the bar chainsaws. This is therefore the best option where and when you fail to acquire the other types of oil from the market. 

Where and when the manufacturer fails to recommended the oil that you can apply on your electric chainsaw, it is important that you go for the three discussed above being; the vegetable-based oils, the highly viscous oils, and the specially blended chainsaws oils. In all circumstances and conditions however, always stick to the oils for the electric chainsaw especially if and when it is available. As an operator, you are further encouraged to consult as you seek alternative oils especially where and when the manufacturer fails to indicate the same. It is the best course of action. Some chainsaw makers inform their customers on this.

Importance of Sticking to Manufacturer Recommendations

So you would ask why it is necessary as well as important to use only that oil which is recommended by the manufacturer. The following could be the best explanations:

  • Using manufacturer ensures your chainsaw has a longer lifespan. Failing to stick to the same would shorten the lifespan of your electric chainsaw. It also affects the drive sprocket and the clutch assembly.
  • The recommended lubrications have been tested and found to be of greater beneficial interests in terms of performance and quality service delivery.
  • External oils such as motor oils tend to reduce the friction for they introduce foreign particles that inhibit the normal operation of the lubricants.
Chainsaw oil

Should Motor Oils be avoided in Totality?

As it was stated earlier, motor oils can be used as the very last option when all the alternatives and options have been exhausted. However, when that condition has not been satisfied, you are advised to avoid it in totality as a form of lubrication despite the fact that it is cheaper. Some of the reasons that have been advanced for reason to stick to the electric chain oils include the following:

  • The electric chainsaw oils have the ability to prevent heat, friction, or slowed operation.
  • It reduces throw-off during phases where it operates under high speeds.
  • It is developed with the ability to resist and prevent the build-up of gum and sap, something that other chainsaws experience on a regular basis.

Summary

The article has discussed the importance of lubricating your electric chainsaw but by using the right or recommended oil for purposes of reducing friction, preventing the introduction of foreign particles, and more importantly, ensuring that the electric chain performs optimally. Moreover, using the right oil enhance the lifespan of the chainsaw. In many cases, sticking to the manufacturer remains the best action to take especially where the recommended oil is still available in the market. Electric chainsaws still remain the most environmentally friendly machines that you could acquire and they are indeed gaining popularity for the efficiency, effectiveness, and power. All that should be maintained is to ensure that you are using the electric chainsaw as recommended by the manufacturer as well as applying the right type of oil.

More:

What Weight is Bar and Chain Oil?