You probably already know before now how handy power tools can be for different purposes. The problem, however, is that there is always a need for high-level maintenance. You don’t want to be making some silly mistakes with your power tool, because you know for sure that such mistakes can lead to a serious occurrence at any time. Notable among such tools that require high level of care to function properly is the chain saw; most significantly its blade.
The direction of the chain saw is very important in determining its efficiency. If for instance, the blade moves in the wrong direction, it would not be effective for cutting down the required material. Instead, it goes on to cut entirely different materials. In worse case scenarios, it can even lead to injury.
Typically, you can avert any of these by being cautious of the direction, while replacing the blade, chain, or bar of your chainsaw. This can seem a little difficult, but with the right attention paid to details, this mistake can be averted.
Why Should It Go In The Right Direction?
It is already enough headache having to stop between your work to take the blade of your chainsaw apart and replace it. But an even bigger stress is needing to again take the device apart after putting it together because it wasn’t done correctly. Apart from that, this seemingly small mistake can lead to very significant damages.
So think of it. Why take such risks, when you can easily learn how to set the chain saw in the right direction and avoid mistakes. Let’s take you through how you can know the direction of your chain saw blades.
How to Know The Chainsaw Blades Direction?
You already know the importance of having your chainsaw running in the right direction by now. Like DirectoryElectronic.com already pointed out, your whole chainsaw will be pretty ineffective and risky when it is not working in the right direction.
What’s the point of going on with such a device that runs in the wrong direction when you can check the required chainsaw blade before using it. Here, take a look at a few tips that you could adopt to find out if the blade is running in the right direction.
Check It Out From The Top
If you are looking from the top, you would inadvertently notice that the blade is contained at the top of the chain. By default, the blades come with two edges. While one of the edges is usually sharp, the other is dull. The chain of the chainsaw is designed to rotate in a clockwise direction.
Irrespective of model, the chainsaw is always designed to work the same. This is the reason why you should always ensure that the sharp edges of the blade faces the clockwise direction during any fix. From the top view, you should normally notice that the sharp edges would be in the opposite direction from the body of the chainsaw, or its motor as you would like to call it.
If your blade is faced in that direction, them its in the right direction.
Checking From the Front and Top View
Just like checking from the top, checking from the side is not complicated. When at this, suppose the chain part is positioned in your right hand side, and the engine part on your left-hand side. Then you should position the blade to be from the left to right direction, as in clockwise.
Note that if it is not done this way, then it would definitely be running in the wrong direction.
Checking From the Bottom Angle
Well, you’ve probably guessed by now that the view from this direction would be exactly opposite from what it is when looked at from the top. Let’s still spell it out though. If the blade is positioned rightly, then you would notice that it is facing towards the body or the engine part of the chainsaw when looking from the bottom.
Checking From The Chain Side View
Now, if you are going to look from this position, then you should expect to see it coming downside from the upside position. If you notice it moving backward, then you want to check for abnormalities.
Having known the right positions of blade and why it should be so, let’s now talk about how to make the chainsaw blade get back to running correctly in case of any abnormalities.
How To Get The Chainsaw Blade To Run In The Correct Direction?
Now that you’ve probably checked your chainsaw, we can only hope that its blade is working as correctly as it should. If it is not working in the correct direction, however, there’s no need for unnecessary alarm. Just get it reset and its good to go again.
Here, take a look at the simple steps to adopt in doing this.
Fix the Bar
Start by checking to be sure that the chain bar is reattached to the body of the chainsaw. If it is not, then you want to carefully place if back in its rightful place. Ensure that the bar gets to its required length according to fitting specifications.
Get the bar adjusted enough to fit the chain perfectly. Also ensure that the fitting of the chain is not too tight when put on the bar.
Check The Direction of The Chainsaw Blade
Bear it in mind at this point that the reason for resetting your chainsaw is because its blade direction is probably faulty. With that in mind, you now know that you should pay extra attention to making sure that the chain us mounted correctly.
It’s easy. Just follow the procedures for checking the right direction to know if you are doing it correctly.
Tighten Up the Blade
Once you are done with all other steps, then it’s time for this last procedure. Tightening up the chain to avoid any disturbances while it is running. The goal here is not to make it too tight or too loose since either of them can make the chainsaw not to function as properly as it should.
Now that you understand everything about the chainsaw blade and how it should be positioned, DirectoryElectronic.com